Lowbed can be produced between 2 to 8 axle and 20 Tons to 180 Tons with different kind of specification according to demand. Self steering axles, hydraulic auto remote control axles, pool type chassis, hydraulic ramp, platform type chassis can be used in different kind of Lowbeds.

– LOWBED 2 AXLE rack is welded by submerged welding machine from 20 mm x 150 mm (ST 52.3 A Quality) bottom and top flat steel and 10 mm ST 52.3 hub plate. It has “I” section and also includes 4 pieces

– Rack is supported with 160 NPI axle beams that crosses rack

AXLE

– Is manufactured in accordance with the European standards. It has a carrying capacity of 16 tons and donated Brake lining and bearing mark TIMKEN and FAG Axles have 10 wheel brace .Axle is certificated by ISO 9001 and 100.000 km guaranty.
– 2 axles with the capacity 12-14-16 tons, are used
– With Air suspension, Stowage spring, Bogie suspension
– There are brake shoes and heavy brake levers suitable for TSE norms

SUSPENSION SYSTEM

– Parabolic double deck Z springs, Stowage springs, bogie suspension

FRONT AXLE LIFTING

– Remote operated elevating system for front axle shaft in cabin

TIRES AND RIMS

–  235/70 R 17.5
–  245/70 R 17.5
–  295/60 R 22.5
–  12 R 22.5
–  315/80 R 22.5 sizes 8+1 tires are used.

ELECTRICAL SYSTEM

–  It is suitable for SAE standards and TUV regulations
–  Electricity is provided by 7 pin plug from vehicle
–  There are necessary traffic advisory and stoplights on both sides
–  There are backlights, brake lights, plate lamps, trailer reflectors and orange warning lights on the sides

BRAKE SYSTEM

–  71/320/ewg ff brake system according to EC standards.
–  Automatic slacks, 2 spring brake chambers and 2 service brake chambers.

2S/2M ABS

–  Air leaks in trailer are blocked by Sweden patented Ruffels union system

KING PIN

–  Steel king-pin which is 2” according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used

PARKING LEGS

–  On the front: 24 tons mechanical trailer legs
–  On the behind: Manuel support legs

LOADING RAMP    

–  Manufactured with Air-Hydraulic piston from NPU with 160

FLOOR

–  Sides; diamond embossed plate and solid floor on tires

 PAINT / COLOR

–  Rack and superstructure  are painted in paint drying oven by Washing + Sanding + 2+1 coat Acrylic Paint

–  It will be specified according to customer request

STANDARD ACCESSORIES

–  2 x 5 expanding brackets(300+300 mm)
–  2 x 5 Load binding ring
–  1 x tool closet(under suspension beam)
–  2 x Bike safety bar
–  1 x Tire wedge and holder
–  1 x Plastic water tank with the capacity of 60 lt.

OPTIONAL SPECIFICATIONS

–  Low bed conveying area, pooled type
–  EBS brake system
–  European axle shaft group and all kind of equipment’s
–  Aluminum rims
–  Double spare tire conveyor
–  Fire extinguisher closet and fire extinguisher tube
–  Tire mark according to request
–  RAL color codes according to request